current electrical systems are based on designs originally were considered at the beginning of their development, ie the system is synchronous and the energy is produced in mobile machines, known as synchronous generators or generators that produce alternating current and working in parallel on a network that makes the whole remains stable, that is, that the machines remain in synchronism conditions, being able to cope with disruption to remain attached to each other.
peak-valley relationship is a key issue, as it defines several aspects: the maximum dimensions of the system (peak value), the need for flexible operation (The ramps), the need to base (the value of the valley) and the pattern of consumption, since a more orderly consumption would a more flat.
Possibility of control by the supply network at every moment by internet-type system with IP addresses in the appliances?
An electrical system must contain a stable generation support of sufficient size to meet changes in demand, generation and topology that are considered "normal." That is to say down a certain design criteria, which specify the contingencies or disturbances to which the system undergoes the permissible variations fundamental parameters-frequency, voltage ... - and the allowable impact, or what is the same, the final quality of service.
The price of the energy of each type must be considered in every moment to decide what is consumed and what is not?
Is it necessary to include the costs of pollution in the price?
Very briefly, the necessary balance between generation and demand is achieved by making the generators continue to demand at all times, when it increases and when decreases, which is achieved through the regulatory capacity of an alternator is very high , and speed of response usually satisfactory especially in large systems, where, theoretically, the inertia of the machine makes it possible demand fluctuations do not cause large swings in the control parameters of the network, allowing time for regulating devices to act without compromising quality service.
The magnitude of fluctuations in demand, with the speed of occurrence and responsiveness of all the generators depends on the system is able to maintain its stability.
- The primary regulator, which is the individual response of each generator to try first to recover the balance, when it detects changes in the reference power or changes in machine speed plaintiff (the turbine), which acts in a range of a few seconds. The characteristics of the regulators, if the machines were equipped with the only primary control, while retrieving the generation-demand balance the system would be operating at a frequency other than the original. Therefore there should be a second mode of control, to restore the initial condition, which is the secondary regulation.
- The secondary regulation, slower, trying to recover the value set of desired frequency and exchanges between different areas of the system, acting after a verification process parameters of the network and compared to setpoints, involved in the response of other areas of regulation. It is, therefore, a shared control, which extends operating time in the range of a few minutes.
The "mix" of generating set of all stations must provide the required demand plus required reserves, with some safety margin (10%). Here comes the sword of Damocles of renewable energy, unable to currently used for primary and secondary regulation. Small-hydro and cogeneration also used technology although viable, do not take advantage of dispersion / atomization.
Is it necessary to go to a global control system for all small potential regulators? Assume regulations through large power generating leads monopolies in the energy sector.
is important to note that this type of plant must operate at higher energy as the more manageable in service, wind and solar photovoltaics, to cover more security shortcomings of the latter in response to fluctuations in the system.
Should we add the biogas in this equation as an element that serves primarily as regulardor? "Research in energy storage?
For reasons of inertia and the primary regulator, has been observed that the generation hydro, coal and nuclear must be present in the right proportion at every moment of the production of energy.
What is the feasibility of using hydropower as a central controller through reversible?
peak-valley relationship is a key issue, as it defines several aspects: the maximum dimensions of the system (peak value), the need for flexible operation (The ramps), the need to base (the value of the valley) and the pattern of consumption, since a more orderly consumption would a more flat.
Possibility of control by the supply network at every moment by internet-type system with IP addresses in the appliances?
An electrical system must contain a stable generation support of sufficient size to meet changes in demand, generation and topology that are considered "normal." That is to say down a certain design criteria, which specify the contingencies or disturbances to which the system undergoes the permissible variations fundamental parameters-frequency, voltage ... - and the allowable impact, or what is the same, the final quality of service.
The price of the energy of each type must be considered in every moment to decide what is consumed and what is not?
Is it necessary to include the costs of pollution in the price?
Very briefly, the necessary balance between generation and demand is achieved by making the generators continue to demand at all times, when it increases and when decreases, which is achieved through the regulatory capacity of an alternator is very high , and speed of response usually satisfactory especially in large systems, where, theoretically, the inertia of the machine makes it possible demand fluctuations do not cause large swings in the control parameters of the network, allowing time for regulating devices to act without compromising quality service.
The magnitude of fluctuations in demand, with the speed of occurrence and responsiveness of all the generators depends on the system is able to maintain its stability.
- The primary regulator, which is the individual response of each generator to try first to recover the balance, when it detects changes in the reference power or changes in machine speed plaintiff (the turbine), which acts in a range of a few seconds. The characteristics of the regulators, if the machines were equipped with the only primary control, while retrieving the generation-demand balance the system would be operating at a frequency other than the original. Therefore there should be a second mode of control, to restore the initial condition, which is the secondary regulation.
- The secondary regulation, slower, trying to recover the value set of desired frequency and exchanges between different areas of the system, acting after a verification process parameters of the network and compared to setpoints, involved in the response of other areas of regulation. It is, therefore, a shared control, which extends operating time in the range of a few minutes.
The "mix" of generating set of all stations must provide the required demand plus required reserves, with some safety margin (10%). Here comes the sword of Damocles of renewable energy, unable to currently used for primary and secondary regulation. Small-hydro and cogeneration also used technology although viable, do not take advantage of dispersion / atomization.
Is it necessary to go to a global control system for all small potential regulators? Assume regulations through large power generating leads monopolies in the energy sector.
is important to note that this type of plant must operate at higher energy as the more manageable in service, wind and solar photovoltaics, to cover more security shortcomings of the latter in response to fluctuations in the system.
Should we add the biogas in this equation as an element that serves primarily as regulardor? "Research in energy storage?
For reasons of inertia and the primary regulator, has been observed that the generation hydro, coal and nuclear must be present in the right proportion at every moment of the production of energy.
What is the feasibility of using hydropower as a central controller through reversible?